yesterday i shut down my pc whit power on/off button and i hold it push for about 5 seconds for faster shutdown now my pc powering up all fans and led lights turning on but on monitor screen there is not coming up anything not even mobo logo and beep tone too ....
what could be the problem ? Power supply or mobo plz help me i know only you people can help me in this matter
Computer not showing anything on screen
Started by
armada
, Apr 16 2012 09:29 AM
7 replies to this topic
#2
Imran
-
- Members
-
- 3,996 posts
Lifer
Posted 16 April 2012 - 09:57 AM
1. Check the cables of power cable of monitor/lcd. May be they are not properly connected.
2. You may also reseat cards, rams, cables and hard disk. (probably reseating the graphics card will do the trick)
3. You can also check either your computer is working with other monitors or not.
4. Let me think again.
2. You may also reseat cards, rams, cables and hard disk. (probably reseating the graphics card will do the trick)
3. You can also check either your computer is working with other monitors or not.
4. Let me think again.
آجکل جوش میں ہر ایک بتانا چاہ رہا ہے کہ "میں ابنِ بطوطہ میرا لکھا مخطوطہ"
#3
armada
-
- Members
-
- 6,393 posts
Lifer
Posted 16 April 2012 - 10:45 AM
5. Thanks for rep
6. I've performered all the steps you told above please think again and tell me about it
what you think should i change mobo
6. I've performered all the steps you told above please think again and tell me about it
what you think should i change mobo
#4
deffury
-
- Members
-
- 3,846 posts
Lifer
#5
armada
-
- Members
-
- 6,393 posts
Lifer
Posted 16 April 2012 - 12:58 PM
i think it is power supply fault lets see after replacment
#6
Faisal
-
- Members
-
- 4,166 posts
Lifer
- LocationDystopia
Posted 16 April 2012 - 01:12 PM
Considering your monitor/PC is working fine and there's no fault in any of the component then... first
If have any other monitor, check if your PC is displaying with that other monitor. if it does then there's something wrong with your monitor. if it doesn't display, then unplug you PC/monitor from power sockets. open the PC case, take out the battery (cell) which should be located somewhere on the mobo. now turn on the PC/monitor without the cell (hopefully it should give you display now) and go to BIOS and change the VGA settings according your on broad card or discrete by either selecting integrated or PCIe slot (which was the source of the display before the problem), insert the cell back in the slot in the mobo (make sure to not electrocute yourself cause you might be too cute for that in you parents eyes. so un-ground/shield yourself
). save the new configs by hitting f10 or whatever your mobo alows and restart.
I hope it works
If have any other monitor, check if your PC is displaying with that other monitor. if it does then there's something wrong with your monitor. if it doesn't display, then unplug you PC/monitor from power sockets. open the PC case, take out the battery (cell) which should be located somewhere on the mobo. now turn on the PC/monitor without the cell (hopefully it should give you display now) and go to BIOS and change the VGA settings according your on broad card or discrete by either selecting integrated or PCIe slot (which was the source of the display before the problem), insert the cell back in the slot in the mobo (make sure to not electrocute yourself cause you might be too cute for that in you parents eyes. so un-ground/shield yourself
). save the new configs by hitting f10 or whatever your mobo alows and restart.I hope it works
God Bless The Internet !
#7
armada
-
- Members
-
- 6,393 posts
Lifer
Posted 16 April 2012 - 01:38 PM
InshaALLAH If today Bijli returns back i'll take steps mentioned by you Faisal
thanxs for your kind rep
thanxs for your kind rep
#8
jhagra
-
- Members
-
- 368 posts
Bronze member
Posted 16 April 2012 - 02:21 PM
remove all rams if ur pc beeps than ur power supply is ok,, and so is ur mobo and also all cards etc are ok,, then try one ram at a time in all slots ,, to verify all slots are ok and all ram modules are ok,,
also remove the power connector from ur supply and the power connector on mb,, for 5 minutes,,
in these cases i try bare bone pc startup with just one ram module and bare mb,, no card in pc, and proceed with one components at a time..
also remove the power connector from ur supply and the power connector on mb,, for 5 minutes,,
in these cases i try bare bone pc startup with just one ram module and bare mb,, no card in pc, and proceed with one components at a time..
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
